Description
[vc_row][vc_column][vc_column_text]Billet thermostat housing for the mk1 Focus RS and ST170
Completely machined out of billet aluminium and profiled to save weight and look good
This replaces the plastic thermostat housing that is liable to crack
This version still has to bolt onto the spacer plate, if you havent got this or need a new one i sell them seperately
Comes supplied with the 3 mounting bolts,main housing,top thermostat housing and water pipe connections
The water take off on the side uses an 1/8npt thread so you could use an AN type fitting for braided hoses
The heater pipe connections will be supplied fitted as it needs sealant to seal the 2 surfaces
Uses standard ST170/Focus Rs thermostat and bolts up in the exact same way
This housing will also fit the ST170 engine
****
Please note
****
The only difference with the options is so we can supply you the correct length bolts, it is the same housing that is used.
[/vc_column_text][/vc_column][/vc_row]
We do not advise using the cheap thermostats from euro car parts,these do not have a thick rubber sealing ring like the original ford one and do not seal properly
***
These are meant for track/race cars and do not have the water pipes for the inside heater
***
Reviews
There are no reviews yet.